The RC Geek Blog

By: Chris Wolfe

The Tale of Two Exhausts…

A while back, my Friend Brian had a minor incident with his 1/4 scale TBM P-40.  Though, it didn’t result in any physical damage to the airplane, it did result in an impact to the “stand way off scale” exhausts on one side.  Being made of thin plastic, they ended up crushed and unsalvageable.  We originally thought we’d make a quick plug and do some resin castings, but as we looked at the exhausts more, we realized just how out of scale they really were and how much they just didn’t look right at all.  So, enter the 3D printer!  Within a few days, we were able to draw and print some replacements that came out awesome!  Before we begin, if you’ve not read my Q&A on 3D printing, you can read that here to get a better understanding of the process and materials.  Also, if you’d like to see video of this P-40 in action I’ve embedded the video from my YouTube channel at the bottom of this article.  Don’t forget, if you are looking for help with some 3D printing, I can help!  Just shoot me an email through my contact form.

A comparison of the stock exhausts to the final 3D printed exhausts

The CAD Model

First things first, we had to make a CAD model of the exhausts.  In looking at the original plastic exhausts, they were completely out of scale.  We used the basic dimensions as a starting point, but then used pictures of the full size airplane to draw from.  In my research, the P-40 interestingly had different exhaust shapes depending on the variant and model.
Ultimately, we went with the style that had the most flair to it since it looked the best.  Whether this is accurate to the full size airplane or not for this particular model, I couldn’t say, but we new they’d look good in there either way.

Rhino was used to create the CAD model which took about an hr or so to draw initially.  However, as I researched, I noticed the exhausts had a pretty definitive crescent shape to the exhaust that needed work.  So, overall, I would say it took about 2-3 hours to finalize the CAD model for printing.  The base of the model was made by drawing the desired outline and then extruding it to add thickness to it.  The exhausts were done by lofting the base and exhaust cross-sections along the desired curve of the exhaust.  From there, it was a matter of copying the exhaust at equal spacing until 6 total existed in the model.

The Slicing Software

In order to print the CAD model, it first must be exported from the CAD software as a .stl file.  This is a stereolithography file type that when exported to, converts the CAD model into a series of polygons (high resolution = high polygon count).  This is then brought into a slicing software where it is prepared for the 3D printer.  The software generates the necessary G-code to operate the printer.  Also taken into consideration is that since we are using an FDM machine, scaffolding and support material are required for any areas of the part that would otherwise print in mid-air.  This too is done within the slicing software.

The Print

The following pics show the printed part.  All scaffolding/support material was removed resulting in a nice 3D printed part.  Given we are using an FDM machine, there are some striations in the part that do occur, however, this is easily taken care of in the finishing process (next section).  The complete print time took approximately 6 hrs for each exhaust part.  The size of the printed part is approximately 9.5″ long, 2″ wide, and 1″ tall.  It was printed at a 0.15 mm resolution using Polylactic Acid (PLA) as the material.  This results in a hard part that is also, as an added bonus for you green folks, biodegradable.

  Finishing our 3D Printed Exhausts

p40 exhaust printing-12 There are a few different ways to finish an FDM printed part which include lightly melting the surface with a solvent to coating it with a self-leveling epoxy.  In our case, we opted for a simpler approach.  To prepare our 3D printed parts for painting, we simply applied multiple coats of Rust-Oleum high build filler primer.  In other words, a coat of primer was applied, it was lightly sanded down and then the process was repeated until the desired surfaces were smooth.  The focus was on the exposed areas that would be easily seen.  We weren’t too concerned about the underside of the exhausts since those would end up against the fuselage and would not be able to be seen.  Using the high build primer only about 3 coats were required to smooth out the surface and prepare it for paint.

With the exhausts smoothed out to our liking, it was then painted using ALCLAD II (good stuff!) as the base with some black shading added around the edges.  ALCLAD II is a metallic paint that comes in various shades of metals.  It is the best and most convincing paint that I have come across when it comes to painted metallic finishes.  The key is to have a nicely prepared and smoothed out under surface as that’s what makes the paint truly pop.  So, with the exhausts done and painted, it’s simply a matter of dropping them into the cowl!

The Final Result

To fit the exhausts, scale openings were cut into the cowl using a razor saw and Dremel tool for the exhausts to be placed through.  Standoffs were glued onto the base of the exhausts so as to attain the correct spacing within the cowl.  From there, they were glued in place with some 5 minute epoxy and a piece of aluminum tape was place on the back for insurance.

Below you can see the final result as it was well worth the little bit of effort.  It didn’t take much time and now the exhausts are far more representative of the full sized aircraft (the stock ones were pretty bad…).  Little things like this add a considerable amount of realism to ARF’s and kits and it’s fun to do and experiment in different ways.  With 3D printing, making parts like this has gotten a lot easier and quicker.

 

Lest we forget, here is our subject P-40 in action!

The post Adventures in 3D Printing – Ep2 appeared first on The RC Geek.

The RC Geek Blog is your place to learn about all aspects of the RC hobby. Learn to build, design, drive or fly that RC project you’ve always wanted to build, but have been intimidated to try. This blog is here to help you on your journey and provide tips and tricks as you go! My hope is to inspire builders both experienced and new! So, welcome, please look around, it’s an exciting beginning!  I’m currently documenting my latest competition scale RC jet build, a Mark Frankel F4D Skyray, along with some other fun tips and videos. If you can’t find what you’re looking for on this front page, click on any of the categories to the right and it will show just posts related to those categories. Please feel free to add comments and/or contact me directly if you have questions, I’m here to help! And don’t forget to check out my YouTube Channel, I post new videos every week!

Subscribe To Our Blog Now

By Chris Wolfe 19 Sep, 2023
The B-58 Hustler Saga - From Triumph to Tragedy
By Chris Wolfe 13 Mar, 2023
Preparing for Battle: The ULTIMATE Guide to Scale Documentation Maybe you've heard about RC Scale Aircraft competitions, but the thought it sounded intimidating, or the process of it all seemed daunting and discouraging. Well, fear not! I am here to encourage you and dispel any myths you may have heard if any. Scale competition is a fun and challenging segment of the hobby that will undoubtedly make you a better pilot! So, in light of this, I've started a new "Preparing for Battle" live series and in my first episode, "Preparing for Battle: The ULTIMATE Guide to Scale Documentation," we talk about the AMA Scale Nats with special guest Joe Vermilion from Balsa USA and peel back the layers of scale competition and provide information on what it's all about! As an experienced RC Scale Aircraft competitor and two time US Scale Masters National Champion, my hope is to share whatever knowledge and practical advice I can for newcomers and seasoned competitors alike.
By Chris Wolfe 14 Feb, 2023
Are You Ready to Take Your RC Flying to the Next Level?? Then you’re in luck, because we’re giving away an FMS 1400mm F4U Corsair and an FMS 1100mm PC-21 ! But first, let's address the elephant in the room...it's been quite a while since my last blog post. With the move to TN and everything going on trying to get The RC Geek up and running full time, it's been difficult to sit down and set aside time to write. My goal is to change that going forward, so here's hoping! (check the vid below for even more details about everything mentioned here!)
By Chris Wolfe 25 Jan, 2022
Flight of the Flir Cat…The Sequel!! I tell you what, it has been quite the journey getting here! As a project, this Freewing F-14 Tomcat refinish took much longer than I had originally planned based on all of the other distractions that have come through the shop, but I'm so happy with how this model turned out in the end. It did take a few flights to get tuned and I have made a few small modifications in the process since our last installment, but otherwise I'm happy to report that the Tomcat is flying quite well. The F-14 Tomcat has such a great look and presence in the air, you just can't beat it!
By Chris 10 Jan, 2022
10 channels of power…and 1 receiver to rule them all! I personally love having the option for more channels, especially when building my own scale aircraft. While not always necessary, having channel options available is almost always helpful and it opens up opportunities to add scale functions and/or customize the controls more to your liking. And that's not to mention having individual servo setup across the same functions. So, I was excited to finally see the AR103060T and AR10100T 10 channel receivers released from Spektrum. It opens of channel options in a lighter weight package while also supports all of their new technology. Having been flying the NX10 for some time it is nice to finally be able to utilize all of those 10 radio channels.
By Chris 10 Jan, 2022
Good times and Warbird Flying are back! Needless to say, the last year and a half plus has been hard on all of us. With so many of our normal routines and activities disrupted, it has only brought that many more challenges it seems. This hobby is not just about the airplanes and flying, it is about the friends and comradery that can be enjoyed together with others as well. So, when the Scale Squadron's Warbirds & Classics came up again this year after being cancelled in 2020, I was beyond excited to go; it had been almost 2 years since the last event I went to!
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 4 – Freewing F-14 Tomcat Low-Viz Navy Weathering How low can you go?…a little low-viz Tomcat weathering. Finishing up the refinish work on the Freewing F-14 Tomcat, it’s time to apply some characteristic low-viz Navy weathering. The Flir Cat paint scheme is from the mid 90’s at a time when the Tomcats in service were painted primarily in Dark Ghost Grey (FS36320) with variations thereof. They were high maintenance workhorses at this time and the aircraft got extremely dirty during operation. This opens up lots of opportunities to apply different weathering techniques on the airplane to simulate those years of service on the carrier.
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 3 – Freewing F-14 Tomcat Paint, Markings, & Panel Lines
By Chris 27 Sep, 2021
Refinish A Foam Jet Ep 2 - Freewing F-14 Tomcat Cockpit 3D Printing, Painting and Moving Pilots
By Chris 27 Sep, 2021
Fill…sand…poly…sand…primer…sand…aaaannnnddd repeat… You've probably figured out by now, I have many favorite aircraft. ;) However, if I was to put together my top 5 favorite aircraft of all time, the F-14 Tomcat would probably be at or near the top of that list. The airplane was one of brute force, but packaged in an elegant and distinct looking airframe that truly personified its name, Tomcat. And that's not to mention, it was an extremely capable fighter that filled many roles through the years that operated from the early/mid 70's into the mid 2000s.
More Posts
Share by: