The RC Geek Blog

By: Chris Wolfe

A Snap Together BTTF DeLorean?  Great Scott!

I got my start in scale modeling by building plastic models as a kid.  I built many a model in the back of my dad’s shop as far as I can remember.  Those are some of the fondest memories I have from growing up.  I guess that’s why I collect (though rarely build) so many plastic models, haha!  The “Back to the Future” movies are among some of my favorites and a while back I came across the Polar Lights “Back to the Future” DeLorean and seriously, had to have it.  It was a snap together kit, so figured in a few hours I could probably have a nice enough looking model…if I built it…  Well, my son kept asking me to build the model while it sat on my bench and so I figured, why not grab a second one so we could build them together?  I love building with him and he loves to build pretty much anything (he and my daughter are Lego masters!), so it was perfect!  I figured, while we were at it, why not grab the video camera and try a “family build” segment on my YouTube channel.  My kids are always wanting to bomb my videos anyhow, so figured it was time to officially feature them.  Be sure to watch because there’s some pretty funny stuff in there, especially at the very end.   At one point, we were laughing uncontrollably for no reason whatsoever.

The Build

polar-lights-delorean-1 So, we set out on our DeLorean build adventure on a Friday mid-morning after flying.  It was hot outside, so was perfect to just take it easy in-doors.  It sure would have been much more pleasant though if we actually had air-conditioning in our house!  We both eagerly started and tore into the box with my daughter offering up moral support (she’ll have a kit to build with us next time).  With a nice selection of decently detailed parts, it seemed it wouldn’t take too long to get the model together.  My son had it together in about an hour or so…I, being the perfectionist that I am, of course spent way too much time painting the interior and the details so took about 6 hours total.  There’s actually quite a bit of detail that pops out nicely with a little paint.  My son did come back as I was wrapping up and did some exterior detail painting on his which he enjoyed.  The assembly itself was easy enough, but there were a number of ejector pin flashings that need to be cleaned for the parts to fit right.  They initially looked like part of the parts for alignment or stand-offs, but I ultimately realized that wasn’t the case.  Those were the primary source for parts not quite fitting.  The rest of the fit was ok…not great, but not terrible which is about what I would expect from a kit like this.  Also, if you have a kid who plans to play with the car, some glue is a good idea.  Though the parts “snap” into place, they also “snap” out of place just as easily when handling it!

The Results

The detail was decent enough for what the kit is and with some painting really pops out well.  It’s a simple enough build and we had a good time putting them together.  Plus, we have a couple of cool looking “Back to the Future” DeLoreans to add to our collection now!  One of the nice features is that the body comes out of the box with a very convincing stainless steel finish.  No rust on these puppies!  The hardest part is keeping it under 88mph though…you never know what might happen if we get there!

With so many distractions these days, plastic models are a great and simple way to introduce kids to our hobby.  Maybe it leads into RC airplanes or cars, or something like that?  Or maybe it doesn’t?  Either way it’s a great introduction to something more than just another modern day distraction.  For me, I love sharing what I did as a kid with my kids.  My dad did the same with me, only his love was stick and tissue airplanes.  In the end, I can only hope that my kids will look back and enjoy the time we spent fondly the same I do when I think of the building I did as a kid.

The RC Geek Blog is your place to learn about all aspects of the RC hobby. Learn to build, design, drive or fly that RC project you’ve always wanted to build, but have been intimidated to try. This blog is here to help you on your journey and provide tips and tricks as you go! My hope is to inspire builders both experienced and new! So, welcome, please look around, it’s an exciting beginning!  I’m currently documenting my latest competition scale RC jet build, a Mark Frankel F4D Skyray, along with some other fun tips and videos. If you can’t find what you’re looking for on this front page, click on any of the categories to the right and it will show just posts related to those categories. Please feel free to add comments and/or contact me directly if you have questions, I’m here to help! And don’t forget to check out my YouTube Channel, I post new videos every week!

Subscribe To Our Blog Now

By Chris Wolfe 19 Sep, 2023
The B-58 Hustler Saga - From Triumph to Tragedy
By Chris Wolfe 13 Mar, 2023
Preparing for Battle: The ULTIMATE Guide to Scale Documentation Maybe you've heard about RC Scale Aircraft competitions, but the thought it sounded intimidating, or the process of it all seemed daunting and discouraging. Well, fear not! I am here to encourage you and dispel any myths you may have heard if any. Scale competition is a fun and challenging segment of the hobby that will undoubtedly make you a better pilot! So, in light of this, I've started a new "Preparing for Battle" live series and in my first episode, "Preparing for Battle: The ULTIMATE Guide to Scale Documentation," we talk about the AMA Scale Nats with special guest Joe Vermilion from Balsa USA and peel back the layers of scale competition and provide information on what it's all about! As an experienced RC Scale Aircraft competitor and two time US Scale Masters National Champion, my hope is to share whatever knowledge and practical advice I can for newcomers and seasoned competitors alike.
By Chris Wolfe 14 Feb, 2023
Are You Ready to Take Your RC Flying to the Next Level?? Then you’re in luck, because we’re giving away an FMS 1400mm F4U Corsair and an FMS 1100mm PC-21 ! But first, let's address the elephant in the room...it's been quite a while since my last blog post. With the move to TN and everything going on trying to get The RC Geek up and running full time, it's been difficult to sit down and set aside time to write. My goal is to change that going forward, so here's hoping! (check the vid below for even more details about everything mentioned here!)
By Chris Wolfe 25 Jan, 2022
Flight of the Flir Cat…The Sequel!! I tell you what, it has been quite the journey getting here! As a project, this Freewing F-14 Tomcat refinish took much longer than I had originally planned based on all of the other distractions that have come through the shop, but I'm so happy with how this model turned out in the end. It did take a few flights to get tuned and I have made a few small modifications in the process since our last installment, but otherwise I'm happy to report that the Tomcat is flying quite well. The F-14 Tomcat has such a great look and presence in the air, you just can't beat it!
By Chris 10 Jan, 2022
10 channels of power…and 1 receiver to rule them all! I personally love having the option for more channels, especially when building my own scale aircraft. While not always necessary, having channel options available is almost always helpful and it opens up opportunities to add scale functions and/or customize the controls more to your liking. And that's not to mention having individual servo setup across the same functions. So, I was excited to finally see the AR103060T and AR10100T 10 channel receivers released from Spektrum. It opens of channel options in a lighter weight package while also supports all of their new technology. Having been flying the NX10 for some time it is nice to finally be able to utilize all of those 10 radio channels.
By Chris 10 Jan, 2022
Good times and Warbird Flying are back! Needless to say, the last year and a half plus has been hard on all of us. With so many of our normal routines and activities disrupted, it has only brought that many more challenges it seems. This hobby is not just about the airplanes and flying, it is about the friends and comradery that can be enjoyed together with others as well. So, when the Scale Squadron's Warbirds & Classics came up again this year after being cancelled in 2020, I was beyond excited to go; it had been almost 2 years since the last event I went to!
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 4 – Freewing F-14 Tomcat Low-Viz Navy Weathering How low can you go?…a little low-viz Tomcat weathering. Finishing up the refinish work on the Freewing F-14 Tomcat, it’s time to apply some characteristic low-viz Navy weathering. The Flir Cat paint scheme is from the mid 90’s at a time when the Tomcats in service were painted primarily in Dark Ghost Grey (FS36320) with variations thereof. They were high maintenance workhorses at this time and the aircraft got extremely dirty during operation. This opens up lots of opportunities to apply different weathering techniques on the airplane to simulate those years of service on the carrier.
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 3 – Freewing F-14 Tomcat Paint, Markings, & Panel Lines
By Chris 27 Sep, 2021
Refinish A Foam Jet Ep 2 - Freewing F-14 Tomcat Cockpit 3D Printing, Painting and Moving Pilots
By Chris 27 Sep, 2021
Fill…sand…poly…sand…primer…sand…aaaannnnddd repeat… You've probably figured out by now, I have many favorite aircraft. ;) However, if I was to put together my top 5 favorite aircraft of all time, the F-14 Tomcat would probably be at or near the top of that list. The airplane was one of brute force, but packaged in an elegant and distinct looking airframe that truly personified its name, Tomcat. And that's not to mention, it was an extremely capable fighter that filled many roles through the years that operated from the early/mid 70's into the mid 2000s.
More Posts
Share by: