The RC Geek Blog

By: Chris Wolfe

 It’s always a good time at the Expo!

When January rolls around, that always means it’s AMA Expo time!  It’s hard to believe that’s it’s actually been a year already since the last show.  Every year the expo is held at the Ontario Convention Center and features a bunch of vendors and manufacturers in the RC industry so it’s always an interesting show to head to.  It’s more than that though.  The RC community is like a family, so the show feels almost like a reunion as I get a chance to catch up with friends that I don’t get to see but just once or twice a year plus meeting new friends too.

This year, I was honored to be asked by the AMA to be one of the presenters for the show.  Truth be told, when the AMA asked me to speak at the show, I was humbled by the opportunity.  I’ve been coming to this show since I was a kid and as I mentioned in my article about this show last year, I even met my wife at this show 15 years ago if you can even believe that!  But, to share the presenters stage with so many amazing people is something I never imagined truthfully.  The AMA was cool enough to video and provide my presentation to post on my YouTube channel, so here it is in case you missed it!

What was cool too was that as a part being a presenter, the AMA provided a booth space which gave me the opportunity to visit with so many folks, it was really awesome!  I brought my trusty Robo3D printer along with as many jets as I could fit in my van for a display.  I was printing some fun placards to give away and having the printer running the whole show really garnered quite a bit of interest.  I brought along my kit bashed Kfir (from the Freewing Mirage 2000 ) and so it was a great way to introduce some applications for 3D printing since many of the conversion parts were printed on the Robo.

 

EXPO VENDORS

Knowing that I’d be at the show the whole weekend, I hoped to get a good look at everything.  As it turned out, I didn’t have as much time as I thought I would based on having a booth setup.  That said, there was a good assortment of vendors again this year, though there appeared to be a few less this year than last.  That didn’t keep it from being a good show though.  What was interesting was that there was considerably less quadcopter swag at the show with only one vendor that I noticed there primarily featuring multi-rotors.  Also, of the US big box hobby distributors, only Horizon Hobby was there.  There was no Great Planes booth like there normally is, nor Hobby People.  It was unfortunately at the show that I heard that Hobby People will be closing it’s doors permanently in February.🙁 JB-Hobbies was there with some killer deals on the VQ Warbirds they sell to which I found out they are closing up shop too.  It’s an unfortunate trend, but it’s no question the hobby industry can be tough at times.  Interestingly, spectator attendance as a whole was up this year compared to last.  So, hopefully next year we’ll see a return on some vendors and see some new ones as well.

😉

One of the vendors I was very intrigued by was Graupner USA.  Graupner has had a growing presence in the US and have a very nice line of telemetry radios and equipment (servos, esc’s, etc all with built in telemetry).  With the absence of Airtronics now, I’ve been in the market for a good radio replacement and these certainly look good, especially for the price!  I have their 12 channel MZ-24 Pro radio in my hands and so will be exploring what it can do.

STATIC MODEL COMPETITION

What I always gravitate to is of course the scale stuff.  They have a static model competition, so I’ll always cruise the aisle to see what’s been entered and there’s always some nicely built aircraft.  Here are just a few of the aircraft entered

 

Well, if you’ve never been to this show, it’s certainly one to put on the list if you’re in the Southern California area.  Until next year AMA Expo West!

 

 

 

The RC Geek Blog is your place to learn about all aspects of the RC hobby. Learn to build, design, drive or fly that RC project you’ve always wanted to build, but have been intimidated to try. This blog is here to help you on your journey and provide tips and tricks as you go! My hope is to inspire builders both experienced and new! So, welcome, please look around, it’s an exciting beginning!  I’m currently documenting my latest competition scale RC jet build, a Mark Frankel F4D Skyray, along with some other fun tips and videos. If you can’t find what you’re looking for on this front page, click on any of the categories to the right and it will show just posts related to those categories. Please feel free to add comments and/or contact me directly if you have questions, I’m here to help! And don’t forget to check out my YouTube Channel, I post new videos every week!

Subscribe To Our Blog Now

By Chris Wolfe 19 Sep, 2023
The B-58 Hustler Saga - From Triumph to Tragedy
By Chris Wolfe 13 Mar, 2023
Preparing for Battle: The ULTIMATE Guide to Scale Documentation Maybe you've heard about RC Scale Aircraft competitions, but the thought it sounded intimidating, or the process of it all seemed daunting and discouraging. Well, fear not! I am here to encourage you and dispel any myths you may have heard if any. Scale competition is a fun and challenging segment of the hobby that will undoubtedly make you a better pilot! So, in light of this, I've started a new "Preparing for Battle" live series and in my first episode, "Preparing for Battle: The ULTIMATE Guide to Scale Documentation," we talk about the AMA Scale Nats with special guest Joe Vermilion from Balsa USA and peel back the layers of scale competition and provide information on what it's all about! As an experienced RC Scale Aircraft competitor and two time US Scale Masters National Champion, my hope is to share whatever knowledge and practical advice I can for newcomers and seasoned competitors alike.
By Chris Wolfe 14 Feb, 2023
Are You Ready to Take Your RC Flying to the Next Level?? Then you’re in luck, because we’re giving away an FMS 1400mm F4U Corsair and an FMS 1100mm PC-21 ! But first, let's address the elephant in the room...it's been quite a while since my last blog post. With the move to TN and everything going on trying to get The RC Geek up and running full time, it's been difficult to sit down and set aside time to write. My goal is to change that going forward, so here's hoping! (check the vid below for even more details about everything mentioned here!)
By Chris Wolfe 25 Jan, 2022
Flight of the Flir Cat…The Sequel!! I tell you what, it has been quite the journey getting here! As a project, this Freewing F-14 Tomcat refinish took much longer than I had originally planned based on all of the other distractions that have come through the shop, but I'm so happy with how this model turned out in the end. It did take a few flights to get tuned and I have made a few small modifications in the process since our last installment, but otherwise I'm happy to report that the Tomcat is flying quite well. The F-14 Tomcat has such a great look and presence in the air, you just can't beat it!
By Chris 10 Jan, 2022
10 channels of power…and 1 receiver to rule them all! I personally love having the option for more channels, especially when building my own scale aircraft. While not always necessary, having channel options available is almost always helpful and it opens up opportunities to add scale functions and/or customize the controls more to your liking. And that's not to mention having individual servo setup across the same functions. So, I was excited to finally see the AR103060T and AR10100T 10 channel receivers released from Spektrum. It opens of channel options in a lighter weight package while also supports all of their new technology. Having been flying the NX10 for some time it is nice to finally be able to utilize all of those 10 radio channels.
By Chris 10 Jan, 2022
Good times and Warbird Flying are back! Needless to say, the last year and a half plus has been hard on all of us. With so many of our normal routines and activities disrupted, it has only brought that many more challenges it seems. This hobby is not just about the airplanes and flying, it is about the friends and comradery that can be enjoyed together with others as well. So, when the Scale Squadron's Warbirds & Classics came up again this year after being cancelled in 2020, I was beyond excited to go; it had been almost 2 years since the last event I went to!
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 4 – Freewing F-14 Tomcat Low-Viz Navy Weathering How low can you go?…a little low-viz Tomcat weathering. Finishing up the refinish work on the Freewing F-14 Tomcat, it’s time to apply some characteristic low-viz Navy weathering. The Flir Cat paint scheme is from the mid 90’s at a time when the Tomcats in service were painted primarily in Dark Ghost Grey (FS36320) with variations thereof. They were high maintenance workhorses at this time and the aircraft got extremely dirty during operation. This opens up lots of opportunities to apply different weathering techniques on the airplane to simulate those years of service on the carrier.
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 3 – Freewing F-14 Tomcat Paint, Markings, & Panel Lines
By Chris 27 Sep, 2021
Refinish A Foam Jet Ep 2 - Freewing F-14 Tomcat Cockpit 3D Printing, Painting and Moving Pilots
By Chris 27 Sep, 2021
Fill…sand…poly…sand…primer…sand…aaaannnnddd repeat… You've probably figured out by now, I have many favorite aircraft. ;) However, if I was to put together my top 5 favorite aircraft of all time, the F-14 Tomcat would probably be at or near the top of that list. The airplane was one of brute force, but packaged in an elegant and distinct looking airframe that truly personified its name, Tomcat. And that's not to mention, it was an extremely capable fighter that filled many roles through the years that operated from the early/mid 70's into the mid 2000s.
More Posts
Share by: