The RC Geek Blog

By: Chris Wolfe

Another Jet Hangar Hobbies Scale Masters Champion! I can't even believe it! :)

Scale competition has been a big part of what I enjoy in this hobby. There's just something about building and flying a model that you've created with so much effort to try and simulate and/or replicate a full scale aircraft. For me, it's so much about flying an airplane that I never in my wildest dreams will have the chance to fly in full scale. That said, competition scale modelling hasn't been a large focus for me the last couple years.  Filming and writing these reviews and tutorials takes quite a bit of time, and I've been having a good time flying a number of different models in the process. However, when the Scale Masters Championships came back to California again this year (October 17-20, 2019), being hosted by the Clovis RC club, I got the bug and I knew that I wanted to give it another go. I could only hope to replicate the magic of my 2016 win with my Jet Hangar Mirage IIIRS.  Truth be told, following 2016, I was inspired to get my big Mark Frankel Skyray built for the next championships. Well, strangely enough, you actually have to work on a model to get it done! Who knew?! Not to mention Elf labor has gotten so expensive in California these days. So, in the absence of a big Skyray, I wanted to give the championships a try with my Jet Hangar Hobbies A-7 Corsair II and I can't even believe that I would be reporting a second time that I came out of the event as the "Grand National Champion" finishing 1st place in Expert for 2019!

40 YEARS OF COMPETITION

Organized by the U.S. Scale Masters Association, 2019 marked the 40th annual Championships event. Though the hobby has evolved, the technology has improved and new classes have been added to the competition mix, the goal of the Scale Masters has never changed which has been to highlight the best in RC scale modeling. And those 40 years have seen so many of the best scale modelers compete from the US and around the world. In fact, my dad competed in the very first Scale Masters championships in 1980 (as well as subsequent years) held out at Mile Square park with a gorgeous DayGlo orange F9F Cougar of his own design. The truth of the matter is that a weekend at the Scale Masters Championships is such an inspiring time with a camaraderie that can only be explained as a family gathering. It is such an incredible group of talented and supportive modelers that are there to have a great time while also put their skills up against the best around.

THE COMPETITION FORMAT

 It's been a few years since my last competition related article, so I thought it would be worth talking briefly about the format of the competition. The competition starts with static judging of each of the entries. The aircraft is judged to a maximum of 100 points for accuracy of outline, color and markings, and craftsmanship to a documentation book provided by the entrant. From there, 5 flight rounds are flown over the course of the weekend with each flight score out of a maximum of 100 points. Once completed, the top 3 flight scores are averaged together and then added to the static score for the final score for each entrant. There are 5 required maneuvers to be demonstrated during the flight (takeoff, landing, fly past, figure 8, realism) along with 5 optional maneuvers that are chosen by the contestant that are prototypical of the airplane. In fact, leading up to the competition, I put together a video discussion about it which is below:

Also, as noted in the video, there are a whole different array of categories to compete in, so it's really open to any number of aircraft whether foam, ARF, composite, built up, etc. Here's a quick summary of the categories to give an idea.


  • Pro-Am Sportsman -- Category for entry level competition pilots that focuses most of the points on the flying scores. Aircraft don't require full documentation, only proof of the aircraft for a maximum of 5 static points allowing for virtually any type of aircraft to be entered.
  • Pro-Am Pro -- Category for more experienced competition pilots that focuses most of the points on the flying scores. Aircraft don't require full documentation, only proof of the aircraft for a maximum of 5 static points allowing for virtually any type of aircraft to be entered.
  • Advanced -- Category for pilots who've not built their aircraft (ARF's or purchased, etc.) or is part of a team. The entrant provides full documentation for static judging the same as the team and expert categories.
  • Team -- Category for a team of builder and pilot. The builder provides full documentation for static judging and the pilot flies the aircraft in competition.
  • Expert -- Category for the builder and pilot who both builds and flies the aircraft in competition.

In terms of the weekend itself, it all started Thursday with static judging and flight practice. For me personally, I always bring an airplane to practice with at the field during the static judging day. My goal is to get in as many flights as I can to get my bearings on the field. Every field is different and it's important to understand the differences for maneuver placement and visual acuity, not to mention sorting out the approach to landing. I had with me my trusty Freewing F-4 Great Pumpkin and E-flite F-16 and hammered out at least half a dozen flights between the two, even in some pretty windy conditions.

As nice as Thursday was, Friday was met with some challenging wind conditions which made some of the takeoffs and landings a bit interesting for the day. Thankfully, that all settled down and Saturday and Sunday ended up being fantastic! Though, there was only one catastrophic crash that I recall, there was a considerable amount of attrition this year in the Expert category that I'd not seen the likes of before. It seemed to be mostly mechanical type of issues that unfortunately precluded some entrants from fully completing all of the flight rounds. Here's the full round up of the scores (credit: US Scale Masters Association website).

Here are a few pictures and videos from the event. I still can't believe the end result! Once again, being able to share the experience with my parents and compete with one of my dad's designs yet again makes it all the more special to me. Now it's time to get my next competition bird built!


A FEW PICTURES...

A FEW VIDEOS...

The following videos feature some of my favorite airplanes from the event. I was stoked to be able to finally see Chris Spangenberg's masterfully crafted Hawker Typhoon fly. It is about the most perfectly built scale model I've seen!


Hawker Typhoon - This Hawker Typhoon was built by Chris Spangenberg from Vailencourt plans and is roughly 1/5 scale at 100" wingspan. It weighs 53 lb and is powered by a DA85 swinging a 26x10 prop. Paints used were Testor's enamels with a KlassKote clear over the entire model. The model finished first in team scale being flown by Bill Adams and is an incredible representation of the Typhoon.


Laird Turner Meteor - This LTR-14 was a really unique model that I'd not seen before. Flown by Robert Wagoner, he had done a complete overhaul on the stock ECOMRC ARF completely recovering the airplane and installing a Moki 150 into it. The airplane really looked good and I can imagine is a really fun airplane to fly.


A6M Zero - This Top RC A6M Zero is actually an ARF, however, the owner and pilot Adam Clement spent a year fully detailing and painting the airframe and it looked fantastic! It featured full rivet detail, nicely executed paint chipping and paint and a pretty incredible cockpit. To add to that, the model was powered by a Saito FG90 3-cylinder radial engine, so it sounded sweet!


Hawker Hunter - This Hawker Hunter was another Top RC Model airframe and it flew great! Powered by a KingTech k160-G2 turbine, it weighs 32 lb dry being able to hold up to 1 gallon of fuel and also features smoke (though not used for the competition routine). The model was an extremely nice flyer and finished up in 1st place of the Pro-Am Sportsman category flown by Jan Sundberg.


P-47 Thunderbolt - This CARF P-47 was entered in the Pro-Am Pro class by Bill Adams and it was such a great flying airplane. Combined with the Moki for power, it sounded so good! Bill finished 2nd in the class averaging 95.25 in his flight scores. The CARF P-47 Thunderbolt in any form is sweet, but add in a Moki 250 5-cylinder Radial Engine and you have something that is absolutely amazing!


A-7 Corsair II - I thought I'd go ahead and throw this in as this is a flight video of my A-7 from a couple years ago (prior to the gear mods). This is the airplane with JetFan90 installed using a 12s 5800mah battery (2x 6s packs connected in series).

The RC Geek Blog is your place to learn about all aspects of the RC hobby. Learn to build, design, drive or fly that RC project you’ve always wanted to build, but have been intimidated to try. This blog is here to help you on your journey and provide tips and tricks as you go! My hope is to inspire builders both experienced and new! So, welcome, please look around, it’s an exciting beginning!  I’m currently documenting my latest competition scale RC jet build, a Mark Frankel F4D Skyray, along with some other fun tips and videos. If you can’t find what you’re looking for on this front page, click on any of the categories to the right and it will show just posts related to those categories. Please feel free to add comments and/or contact me directly if you have questions, I’m here to help! And don’t forget to check out my YouTube Channel, I post new videos every week!

Subscribe To Our Blog Now

By Chris Wolfe 19 Sep, 2023
The B-58 Hustler Saga - From Triumph to Tragedy
By Chris Wolfe 13 Mar, 2023
Preparing for Battle: The ULTIMATE Guide to Scale Documentation Maybe you've heard about RC Scale Aircraft competitions, but the thought it sounded intimidating, or the process of it all seemed daunting and discouraging. Well, fear not! I am here to encourage you and dispel any myths you may have heard if any. Scale competition is a fun and challenging segment of the hobby that will undoubtedly make you a better pilot! So, in light of this, I've started a new "Preparing for Battle" live series and in my first episode, "Preparing for Battle: The ULTIMATE Guide to Scale Documentation," we talk about the AMA Scale Nats with special guest Joe Vermilion from Balsa USA and peel back the layers of scale competition and provide information on what it's all about! As an experienced RC Scale Aircraft competitor and two time US Scale Masters National Champion, my hope is to share whatever knowledge and practical advice I can for newcomers and seasoned competitors alike.
By Chris Wolfe 14 Feb, 2023
Are You Ready to Take Your RC Flying to the Next Level?? Then you’re in luck, because we’re giving away an FMS 1400mm F4U Corsair and an FMS 1100mm PC-21 ! But first, let's address the elephant in the room...it's been quite a while since my last blog post. With the move to TN and everything going on trying to get The RC Geek up and running full time, it's been difficult to sit down and set aside time to write. My goal is to change that going forward, so here's hoping! (check the vid below for even more details about everything mentioned here!)
By Chris Wolfe 25 Jan, 2022
Flight of the Flir Cat…The Sequel!! I tell you what, it has been quite the journey getting here! As a project, this Freewing F-14 Tomcat refinish took much longer than I had originally planned based on all of the other distractions that have come through the shop, but I'm so happy with how this model turned out in the end. It did take a few flights to get tuned and I have made a few small modifications in the process since our last installment, but otherwise I'm happy to report that the Tomcat is flying quite well. The F-14 Tomcat has such a great look and presence in the air, you just can't beat it!
By Chris 10 Jan, 2022
10 channels of power…and 1 receiver to rule them all! I personally love having the option for more channels, especially when building my own scale aircraft. While not always necessary, having channel options available is almost always helpful and it opens up opportunities to add scale functions and/or customize the controls more to your liking. And that's not to mention having individual servo setup across the same functions. So, I was excited to finally see the AR103060T and AR10100T 10 channel receivers released from Spektrum. It opens of channel options in a lighter weight package while also supports all of their new technology. Having been flying the NX10 for some time it is nice to finally be able to utilize all of those 10 radio channels.
By Chris 10 Jan, 2022
Good times and Warbird Flying are back! Needless to say, the last year and a half plus has been hard on all of us. With so many of our normal routines and activities disrupted, it has only brought that many more challenges it seems. This hobby is not just about the airplanes and flying, it is about the friends and comradery that can be enjoyed together with others as well. So, when the Scale Squadron's Warbirds & Classics came up again this year after being cancelled in 2020, I was beyond excited to go; it had been almost 2 years since the last event I went to!
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 4 – Freewing F-14 Tomcat Low-Viz Navy Weathering How low can you go?…a little low-viz Tomcat weathering. Finishing up the refinish work on the Freewing F-14 Tomcat, it’s time to apply some characteristic low-viz Navy weathering. The Flir Cat paint scheme is from the mid 90’s at a time when the Tomcats in service were painted primarily in Dark Ghost Grey (FS36320) with variations thereof. They were high maintenance workhorses at this time and the aircraft got extremely dirty during operation. This opens up lots of opportunities to apply different weathering techniques on the airplane to simulate those years of service on the carrier.
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 3 – Freewing F-14 Tomcat Paint, Markings, & Panel Lines
By Chris 27 Sep, 2021
Refinish A Foam Jet Ep 2 - Freewing F-14 Tomcat Cockpit 3D Printing, Painting and Moving Pilots
By Chris 27 Sep, 2021
Fill…sand…poly…sand…primer…sand…aaaannnnddd repeat… You've probably figured out by now, I have many favorite aircraft. ;) However, if I was to put together my top 5 favorite aircraft of all time, the F-14 Tomcat would probably be at or near the top of that list. The airplane was one of brute force, but packaged in an elegant and distinct looking airframe that truly personified its name, Tomcat. And that's not to mention, it was an extremely capable fighter that filled many roles through the years that operated from the early/mid 70's into the mid 2000s.
More Posts
Share by: