The RC Geek Blog

By: Chris Wolfe

Raised Rivets made easy

I had originally intended for our last article and this one to be a single write-up.  However, as I continued to write more and more on the construction, I realized that the article really needed to be split into two.  Also, since detailing and the application of raised rivets is extensible to more than just speed brakes, I figured a single article on this process would be good since it is a process that can be applied to aircraft as a whole.  As with the last article, I’ve also included a how-to video to help illustrate the process which is at the end of the article.

Let’s Get Things Ready

buld-an-rc-jet---skyray-88 Last time we built our speed brake assemblies to where we had 4 fully functional speed brakes that could be installed into the airframe.  However, detailing the internals is quite a bit simpler with the speed brakes outside of the airframe and broken down into their components.  The first item of business was to finish the inside speed brake by adding the sheet metal close out surface on the inside.  This was cut from 1/64″ ply and glued onto the basswood stiffeners that create our hinge mentioned previously.  Additionally, to get a nice sheet metal look to the exposed fiberglass on the inside, 3M glazing putty was used to fill in the voids of the exposed glass cloth.  The putty was applied, sanded when cured and lightly primered (I like to use EVERCOAT lacquer primer ).  When necessary, a second application was applied to ensure the interior was completely smooth.  It has to look like metal afterall!

Raised Rivets

From there, raised rivets were added throughout the interior to simulate the full size aircraft as much as possible (I actually placed the raised rivets on the inside liners before even gluing the balsa edges).  The rivets used are a laser cut vinyl rivet available from Chad Veich Models.  What’s nice about these is that Chad will custom cut whatever size and spacing needed for your project.  In the case of the Skyray, I needed two spacings based on what my resources showed.

Note that with these rivets being vinyl, they are most effective as a raised rivet since there will be a raised definition once placed on the surface.  Based on that alone, they are not the best choice if one is looking to apply a flush rivet.  Flush rivets should be flush to the surface and are more accurate with a recessed definition.  I will show how to do flush rivets in a separate article when we get to that on our Skyray.  (For flush rivets, I like to use a pin vise and sharpened tube.  I plan to use the vinyl rivet carrier from Chad’s raised rivets as a guide when the time comes.)

To apply these raised rivets, it’s simply a matter of plotting out the rivet pattern on the receiving part first with a pencil and applying the vinyl dots along that pattern appropriately.  The rivets are transferred by first peeling away the main carrier to expose just the rivets on the backing.  A piece of scotch tape (clear so we can see the placement) is then placed over  the rivets and a burnishing tool is used (a wood sculpting tool works well) to help transfer the rivets from the backing to the tape.  From there, the rivets are placed as appropriate onto the parts.  It really is that simple when dealing with  these vinyl rivets as they are pre-cut and spaced perfectly for us.  The most difficult part is getting the rivets off of the backing and onto the scotch tape.  Additionally, if at any time we make a mistake or anything like that, it’s simple to peel away the rivets and start again or add and remove as necessary.

With the raised rivets placed at last, the last item to finish off speed brakes was to add the raised hatch detail on the interior on all four brakes.  To simulate this, aluminum tape was used.  The tape was burnished with a scotchbrite pad (for paint adhesion) and then cut to the appropriate size and simply stuck in place.  To finish it off a single rivet was placed in each corner based on the reference material.  Lastly, a light dusting of primer was sprayed over the interior of the speed brakes.  It’s simply a light dusting as we don’t want to fill in too much the hard work we completed!

To help illustrate the process a bit more, here’s a short how-to video on how the detailing was done:

So, at last, we now have 4 completed speed brakes ready to install into our fuselage!  It took some up front planning and some extra work, but the end result is well worth it.  Our next step will be to install these speed brakes into the fuselage.  From there, we will move on with installing bulkheads and building hatches.  Here’s a quick test fit of the speed brakes into the airframe…Let the games begin!

The post How to Build an RC Jet – Part 8 appeared first on The RC Geek.

The RC Geek Blog is your place to learn about all aspects of the RC hobby. Learn to build, design, drive or fly that RC project you’ve always wanted to build, but have been intimidated to try. This blog is here to help you on your journey and provide tips and tricks as you go! My hope is to inspire builders both experienced and new! So, welcome, please look around, it’s an exciting beginning!  I’m currently documenting my latest competition scale RC jet build, a Mark Frankel F4D Skyray, along with some other fun tips and videos. If you can’t find what you’re looking for on this front page, click on any of the categories to the right and it will show just posts related to those categories. Please feel free to add comments and/or contact me directly if you have questions, I’m here to help! And don’t forget to check out my YouTube Channel, I post new videos every week!

Subscribe To Our Blog Now

By Chris Wolfe 19 Sep, 2023
The B-58 Hustler Saga - From Triumph to Tragedy
By Chris Wolfe 13 Mar, 2023
Preparing for Battle: The ULTIMATE Guide to Scale Documentation Maybe you've heard about RC Scale Aircraft competitions, but the thought it sounded intimidating, or the process of it all seemed daunting and discouraging. Well, fear not! I am here to encourage you and dispel any myths you may have heard if any. Scale competition is a fun and challenging segment of the hobby that will undoubtedly make you a better pilot! So, in light of this, I've started a new "Preparing for Battle" live series and in my first episode, "Preparing for Battle: The ULTIMATE Guide to Scale Documentation," we talk about the AMA Scale Nats with special guest Joe Vermilion from Balsa USA and peel back the layers of scale competition and provide information on what it's all about! As an experienced RC Scale Aircraft competitor and two time US Scale Masters National Champion, my hope is to share whatever knowledge and practical advice I can for newcomers and seasoned competitors alike.
By Chris Wolfe 14 Feb, 2023
Are You Ready to Take Your RC Flying to the Next Level?? Then you’re in luck, because we’re giving away an FMS 1400mm F4U Corsair and an FMS 1100mm PC-21 ! But first, let's address the elephant in the room...it's been quite a while since my last blog post. With the move to TN and everything going on trying to get The RC Geek up and running full time, it's been difficult to sit down and set aside time to write. My goal is to change that going forward, so here's hoping! (check the vid below for even more details about everything mentioned here!)
By Chris Wolfe 25 Jan, 2022
Flight of the Flir Cat…The Sequel!! I tell you what, it has been quite the journey getting here! As a project, this Freewing F-14 Tomcat refinish took much longer than I had originally planned based on all of the other distractions that have come through the shop, but I'm so happy with how this model turned out in the end. It did take a few flights to get tuned and I have made a few small modifications in the process since our last installment, but otherwise I'm happy to report that the Tomcat is flying quite well. The F-14 Tomcat has such a great look and presence in the air, you just can't beat it!
By Chris 10 Jan, 2022
10 channels of power…and 1 receiver to rule them all! I personally love having the option for more channels, especially when building my own scale aircraft. While not always necessary, having channel options available is almost always helpful and it opens up opportunities to add scale functions and/or customize the controls more to your liking. And that's not to mention having individual servo setup across the same functions. So, I was excited to finally see the AR103060T and AR10100T 10 channel receivers released from Spektrum. It opens of channel options in a lighter weight package while also supports all of their new technology. Having been flying the NX10 for some time it is nice to finally be able to utilize all of those 10 radio channels.
By Chris 10 Jan, 2022
Good times and Warbird Flying are back! Needless to say, the last year and a half plus has been hard on all of us. With so many of our normal routines and activities disrupted, it has only brought that many more challenges it seems. This hobby is not just about the airplanes and flying, it is about the friends and comradery that can be enjoyed together with others as well. So, when the Scale Squadron's Warbirds & Classics came up again this year after being cancelled in 2020, I was beyond excited to go; it had been almost 2 years since the last event I went to!
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 4 – Freewing F-14 Tomcat Low-Viz Navy Weathering How low can you go?…a little low-viz Tomcat weathering. Finishing up the refinish work on the Freewing F-14 Tomcat, it’s time to apply some characteristic low-viz Navy weathering. The Flir Cat paint scheme is from the mid 90’s at a time when the Tomcats in service were painted primarily in Dark Ghost Grey (FS36320) with variations thereof. They were high maintenance workhorses at this time and the aircraft got extremely dirty during operation. This opens up lots of opportunities to apply different weathering techniques on the airplane to simulate those years of service on the carrier.
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 3 – Freewing F-14 Tomcat Paint, Markings, & Panel Lines
By Chris 27 Sep, 2021
Refinish A Foam Jet Ep 2 - Freewing F-14 Tomcat Cockpit 3D Printing, Painting and Moving Pilots
By Chris 27 Sep, 2021
Fill…sand…poly…sand…primer…sand…aaaannnnddd repeat… You've probably figured out by now, I have many favorite aircraft. ;) However, if I was to put together my top 5 favorite aircraft of all time, the F-14 Tomcat would probably be at or near the top of that list. The airplane was one of brute force, but packaged in an elegant and distinct looking airframe that truly personified its name, Tomcat. And that's not to mention, it was an extremely capable fighter that filled many roles through the years that operated from the early/mid 70's into the mid 2000s.
More Posts
Share by: