The RC Geek Blog

By: Chris Wolfe

Fill, sand and repeat…

Continuing with refinishing our FMS P-51, in this installment we’re smoothing out the entire airframe including filling in all of the oversized panel lines.  From there we’re applying our protective coats of polycrylic which will provide our surface in which we can do our paint preparation.  If you missed my build review and paint stripping methods, you can catch that here.  Let’s get to it!

FILLER TIME!

It’s no secret, the panel lines on these foam warbirds are huge.  When I took on this project, I knew that was one of the first things I wanted to rectify.  The overall shape looks so good, smoothing out the finish would only make it look that much better.  So, enter our light weight spackle!  With the paint stripped off of the airframe, the process for filling in the foam texture and panel lines is quite simple.  The key is in the material however.

When I first started this, I tried the pre-primered Patch ‘N Paint from Home Depot as it’s inexpensive to purchase and I just wanted to give it a shot.  Unfortunately, the material did not work very well at all (I’m sure you noticed in the video!) in my opinion.  It seems that the primer affects the consistency as the material does not dry hard (it has a consistency almost like a dried out marshmallow) and does not sand well (crumbles away more than sands).   At one time, you could purchase the material without the primer in it and it worked well.  If you can still find that, then it should work but unfortunately it appears that may not be the case anymore.

FMS-P-51_17 So, after disposing of that material in the best way I could find, I instead went back to my trusty Hobbico Hobby Lite balsa wood filler knowing that it would work well.  It’s excellent material that sands beautifully.  Applying a touch of water into it helps create a creamier consistency so that it smooths out over the surface nicely.  In terms of the application, it’s quite simple as we’re just slathering it over the entire airframe.  However, I like to use an Artist’s Spatula for the application.  This is a very handy tool to have in your arsenal as it works great for applying all types of fillers and epoxies and being metal is easy to clean.  So, using this, I simply applied the filler over the entire airframe…like icing a cake.  Over the panel lines I tried to have sufficient body so that once sanded it would create a smooth continuous surface without any concavity to it.  Of course, there’s always some touch up needed that usually pops up after sanding.  Note that the prep time spent here will establish the smoothness of the finish once the polycrylic is applied.  If you’re noticing popcorned foam and don’t fill it in, it will pop through the polycrylic and finished surface.  So, an ounce of prevention is worth a pound of cure here.

SAND BABY SAND!

With the filler applied and thoroughly dried, it’s ready to sand.  If this were a wood airframe, I would attack it using about a 12″ long sanding block to sand it all smooth.  However, given that this is EPO foam, we want to avoid sanding into the foam as much as possible while also minimizing possible gouging.  So, in this case, I used some 180 grit sand paper for the primary sanding task to knock it all down and alternated with a small 4″ sanding block to level out any peaks and ensure a continuous surface (the best way to sand a round corner is with a flat block ironically).  Note that we don’t want anything heavier than 180 grit as we don’t want to risk cutting too heavily into the foam.  Also, in this case I sanded primarily in a circular motion as that helped to localize the sanding and avoid sanding the foam.  So, using these two tools, we can really quickly sand down the entire airframe and get it all smoothed out.

It will take a couple passes of the filler.  Typically, as you sand you will find areas needing some touchup, so I recommend applying the touchup as you see it.  Also, the time spent in this process here will help determine the overall smoothness of the airframe once the polycrylic is applied, so spend the time needed.

AIRFRAME IMPROVEMENTS

Radiator Vent Scale Detail Addition

One thing to note, the aircraft out of the box has 2 non-scale cooling holes on the underside of the radiator fairing.  To remedy this non-scale feature, I instead cut into the airframe the scale radiator exhaust vent.  An easy mod to do, I simply traced out the outline of the exhaust door and vent onto the underside of the airframe and cut them out.  Using an X-acto knife while cutting vertically straight down, the exhaust door was cut out.  The same was done for the exhaust portion of the fuselage too, however the top of the vent in the fuselage was cut horizontally (parallel to the waterline of the aircraft) so as to create an exhaust duct.  Once removed, the top and sides of the vent exhaust opening in the fuselage were lined with 1/64″ plywood as shown in the pictures below.

The vent door was finished off by lining both sides of the door with 1/64″ plywood.  The hole in the part was plugged with a piece of depron.  Filler was then applied and then sanded to contour to finish it off.  Once the assembly was completed, the vent door was glued into the airframe at the desired angle.  A much needed improvement as this vent door is very characteristic of the P-51!

Elevator Stiffener & Pushrod Attachment

FMS-P-51_27 Noted last time was the fact that the elevator and rudder pushrod installations were lacking robustness — to the extent of having backlash (meaning that when load is applied to the surface, the pushrod bends rather than the surface deflecting).  To resolve this, when the radiator exhaust vent was added in, I used that as a chance to fasten the pushrod sleeves down with some 5 minute epoxy and micro-balloons.  There is a slot in the foam, so the pushrods were pushed into the slot when epoxied with a 1/8″ lite plywood cover to ensure they cannot break free.

FMS-P-51_28 The other thing I noticed is that when pushing large deflections, the elevator carry through lacks sufficient stiffness to keep the two elevator halves from twsting.  So, to remedy that, I simply glued with 5-minute epoxy a piece of 1/16″ plywood cross-grain along the back of the elevator carry through.  This stiffened up the assembly significantly and now no-longer twists at higher deflection angles.

 

ALONG CAME POLYCRYLIC

FMS-P-51_34 With our airframe completely filled and contoured, it’s time to seal it all up so we can get it ready for paint!  The process is simple, I simply brush the entire airframe with multiple coats of Minwax Polycrylic  (satin finish).  Using a foam brush to apply it, the target should be about 5-8 coats or so to seal it all up and smooth it out.  Try to avoid the door hinge areas as it does gum up the hinges.  However, it’s not too terrible to remove once it’s dry if that occurs.  An important note is to avoid drips as much as possible as they’re not easy to sand out.  Unfortunately they can be difficult to spot since the poly is clear when it’s applied, so apply it mindfully.  The nice thing about it is that it dries quickly (especially if placed in the sun for a couple minutes) and so you can apply multiple coats rather quickly.  In our case here, I applied 6 coats of polycrylic onto the airframe.

With the polycrylic applied and cured, we now have a nice canvas for us to paint over while also leveling out our finish a bit.  From here, we will begin to primer the airframe and prepare it for paint…and then of course paint it!  Both of which we will cover next time.  So, until then dust off those projects and get building!

The RC Geek Blog is your place to learn about all aspects of the RC hobby. Learn to build, design, drive or fly that RC project you’ve always wanted to build, but have been intimidated to try. This blog is here to help you on your journey and provide tips and tricks as you go! My hope is to inspire builders both experienced and new! So, welcome, please look around, it’s an exciting beginning!  I’m currently documenting my latest competition scale RC jet build, a Mark Frankel F4D Skyray, along with some other fun tips and videos. If you can’t find what you’re looking for on this front page, click on any of the categories to the right and it will show just posts related to those categories. Please feel free to add comments and/or contact me directly if you have questions, I’m here to help! And don’t forget to check out my YouTube Channel, I post new videos every week!

Subscribe To Our Blog Now

By Chris Wolfe 19 Sep, 2023
The B-58 Hustler Saga - From Triumph to Tragedy
By Chris Wolfe 13 Mar, 2023
Preparing for Battle: The ULTIMATE Guide to Scale Documentation Maybe you've heard about RC Scale Aircraft competitions, but the thought it sounded intimidating, or the process of it all seemed daunting and discouraging. Well, fear not! I am here to encourage you and dispel any myths you may have heard if any. Scale competition is a fun and challenging segment of the hobby that will undoubtedly make you a better pilot! So, in light of this, I've started a new "Preparing for Battle" live series and in my first episode, "Preparing for Battle: The ULTIMATE Guide to Scale Documentation," we talk about the AMA Scale Nats with special guest Joe Vermilion from Balsa USA and peel back the layers of scale competition and provide information on what it's all about! As an experienced RC Scale Aircraft competitor and two time US Scale Masters National Champion, my hope is to share whatever knowledge and practical advice I can for newcomers and seasoned competitors alike.
By Chris Wolfe 14 Feb, 2023
Are You Ready to Take Your RC Flying to the Next Level?? Then you’re in luck, because we’re giving away an FMS 1400mm F4U Corsair and an FMS 1100mm PC-21 ! But first, let's address the elephant in the room...it's been quite a while since my last blog post. With the move to TN and everything going on trying to get The RC Geek up and running full time, it's been difficult to sit down and set aside time to write. My goal is to change that going forward, so here's hoping! (check the vid below for even more details about everything mentioned here!)
By Chris Wolfe 25 Jan, 2022
Flight of the Flir Cat…The Sequel!! I tell you what, it has been quite the journey getting here! As a project, this Freewing F-14 Tomcat refinish took much longer than I had originally planned based on all of the other distractions that have come through the shop, but I'm so happy with how this model turned out in the end. It did take a few flights to get tuned and I have made a few small modifications in the process since our last installment, but otherwise I'm happy to report that the Tomcat is flying quite well. The F-14 Tomcat has such a great look and presence in the air, you just can't beat it!
By Chris 10 Jan, 2022
10 channels of power…and 1 receiver to rule them all! I personally love having the option for more channels, especially when building my own scale aircraft. While not always necessary, having channel options available is almost always helpful and it opens up opportunities to add scale functions and/or customize the controls more to your liking. And that's not to mention having individual servo setup across the same functions. So, I was excited to finally see the AR103060T and AR10100T 10 channel receivers released from Spektrum. It opens of channel options in a lighter weight package while also supports all of their new technology. Having been flying the NX10 for some time it is nice to finally be able to utilize all of those 10 radio channels.
By Chris 10 Jan, 2022
Good times and Warbird Flying are back! Needless to say, the last year and a half plus has been hard on all of us. With so many of our normal routines and activities disrupted, it has only brought that many more challenges it seems. This hobby is not just about the airplanes and flying, it is about the friends and comradery that can be enjoyed together with others as well. So, when the Scale Squadron's Warbirds & Classics came up again this year after being cancelled in 2020, I was beyond excited to go; it had been almost 2 years since the last event I went to!
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 4 – Freewing F-14 Tomcat Low-Viz Navy Weathering How low can you go?…a little low-viz Tomcat weathering. Finishing up the refinish work on the Freewing F-14 Tomcat, it’s time to apply some characteristic low-viz Navy weathering. The Flir Cat paint scheme is from the mid 90’s at a time when the Tomcats in service were painted primarily in Dark Ghost Grey (FS36320) with variations thereof. They were high maintenance workhorses at this time and the aircraft got extremely dirty during operation. This opens up lots of opportunities to apply different weathering techniques on the airplane to simulate those years of service on the carrier.
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 3 – Freewing F-14 Tomcat Paint, Markings, & Panel Lines
By Chris 27 Sep, 2021
Refinish A Foam Jet Ep 2 - Freewing F-14 Tomcat Cockpit 3D Printing, Painting and Moving Pilots
By Chris 27 Sep, 2021
Fill…sand…poly…sand…primer…sand…aaaannnnddd repeat… You've probably figured out by now, I have many favorite aircraft. ;) However, if I was to put together my top 5 favorite aircraft of all time, the F-14 Tomcat would probably be at or near the top of that list. The airplane was one of brute force, but packaged in an elegant and distinct looking airframe that truly personified its name, Tomcat. And that's not to mention, it was an extremely capable fighter that filled many roles through the years that operated from the early/mid 70's into the mid 2000s.
More Posts
Share by: