The RC Geek Blog

By: Chris Wolfe

How to Paint a Pilot Bust and Add Simple Cockpit Details

Check out the full series of videos and articles at: thercgeek.com/kitbashing

One of the features that always gets inspected on a scale model is the cockpit.  There are so many gadgets in the cockpit of a full sized aircraft, it’s fun to see what was modeled.  Yet, when it comes to ARFs and foamies, we’re lucky to get a decent pilot let alone a decent looking cockpit!  So, in this episode of our Foam Kit Bashing Series, we’re going to talk about some quick and easy ways to dress up an otherwise minimalist cockpit.  The whole idea here are simple things that can be done that add big results.  We’ll cover full scratch building of a cockpit in a future episode.  Oh, and in case you missed it, last time we talked about the whole construction process of converting a Freewing Mirage 2000 into an Isreali Kfir.  This airplane has really transformed and looks awesome as a kfir.

Before prepping and painting the airframe (we’ll cover painting in our next episode), we really should work out the cockpit interior first since we need to pull the canopy off the airframe to work on it.  It’s better to do this earlier in the process just in case we mess something up it will be an easier fix.  The base cockpit provided with the Mirage 2000 is ok, but there are definitely a few issues that we’re going to fix.  First off, the pilot is just too small for scale.  To solve this, we’re going to replace him with a 1/12 scale Castle 5 bust which comes from my folks at JetHangar.com and show you how to paint him (this is one of the pilots I manufacture for my folks in sizes ranging from 1/18 scale all the way up to 1/6 scale).  The second thing we’re going to do is show how to make the cockpit a little more “popcorn” proof and then detail it a little bit to make it a little more Kfir representative.  The stock cockpit is black and inside a sealed compartment and had already “popcorned” up…so, now is our time to fix that.

HOW TO PAINT A “CASTLE 5” PILOT BUST

Painting a nice looking pilot is not a difficult thing to do and is something that can actually be done pretty quickly.  We first off need a selection of paint brushes.  I have a number of paint brushes that I turn to when I’m painting a pilot.  I’ll use a wider, kind of square brush for the large areas and then will turn to much smaller brushes for the detail painting.  Also, we need a selection of paints.  The “Castle 5” instructions show all the paints needed from the Testors Model Masters brands which I usually have on hand.  Now, my philosophy in painting these is to paint deep to shallow.  What I mean is that I’ll paint the colors in the deeper recesses first which includes the primary flight suit and helmet, and then paint the individual details one by one finishing up with the highest protruding details last.  Also, as I’m painting, it’s important to overpaint all of the areas in the corners so that there’s none of the under color showing on the finished product.  That allows us to go back and touch up all of the intersecting corners and lines with the other colors wherever we need to.  It’s easier to get a clean line while painting a protruding detail than it is to try and go back and clean up a line in a deep recess.  Note too that if you accidentally overpaint any of the other colors, you can simply go back and touch it up.  I do this a lot because rarely does it come out perfect the first time.

Before any painting was started, it’s worth cleaning the pilot with some water to clean off any mold release.  From there, I used a Tamiya plastic model primer to spray over the bust.  The primer is white, so that sufficed for the helmet color as well (I generally like to spray paint the helmets first to avoid any brush marks since that’s the first thing seen).  From there, I brush painted the flight suit Dark Green with a wide brush (it took 2 coats), the pilots undershirt Armor Sand and then the skin tone around the pilots neck (I used Radome Tan for this).  The oxygen mask and the pilots floatation and survival gear was painted Olive Drab.  Lastly, the straps were painted Euro I Grey and then the buckles painted with Steel along with the oxygen mask clip details.  The clips for the oxygen mask that are on the helmet were painted Flat Black.  Notice to this point, we have yet to paint the visor.  That was intentional, keep reading…😉

Once all of the primary painting is done some dry brushing was done on the pilot suit and details which really helped add a some extra dimension and realism to the pilot.  If you’re not familiar with dry brushing as a technique, it is the act of taking a brush that has had most of the paint wiped off of it with a paper towel and then brushing it over a model.  What it does is leave a small amount of residual  paint over highlighted areas and gives the illusion of added depth to details.  For pilot painting, I like to use a little bit of the base color that was used for painting onto the back of a paper cup, mix in a little white, and then use that lightened color to dry brush over that base color that I used on the pilot.  That lightens all of the highlights on the pilot and really makes it look notably better.  For example, I used some lightened Dark Green and dry brushed that over the flight suit, I used lightened Euro 1 Grey to dry brush over the straps, and lightened Olive Drab (you can even use the Armor Sand) to dry brush over the flotation and survival gear, etc.  Experiment with different colors to get the desired look.  Dry brushing is a very handy technique to have in your arsenal and is something you can use quite a bit.  There are additional things you can do to add even more realism to pilots like oil paint washes and such, but that’s not something I’ve played with much.  There are some good tutorials on that over at Aces of Iron.

With the dry brushing done, the last thing done was to hand paint the squadron insignia on the patch on the right shoulder (there’s a small molded detail on the pilot for this).  Well, I should say that it was attempted anyways…

Before painting the visor (this is the very last thing painted), I sprayed the whole pilot with a flat clear coat ( Testors Dullcote works).  This helps even everything out and give a uniform sheen.  Also, by doing this all of the dry brushing and detail painting really pops.  The very last thing done is painting the visor.  I use a high gloss graphite metallic paint here as that gives it a nice high gloss and translucent appearance.  Note that if the finish of the visor isn’t as high gloss as you’d like, you can paint Pledge Floor Care Finish (used to be Future Floor Acrylic) over it.  I’ve also heard of guys applying epoxy too, just try to avoid getting air in the epoxy as you mix it.




“POPCORN” PROOFING AND COCKPIT DETAILING

Now that the pilot is painted, all he needs now is a fresh new office to work in.  The stock Mirage 2000 cockpit is a decent base to start with and with a few extra goodies can be made into a nice enough looking cockpit.  Unfortunately, it is painted black and so all those lovely EPO foam beads had already swelled up like balloons…  That, of course, HAD to be fixed and in a way that would keep it from returning in the future.

To hide the texture, I simply covered all of the exposed areas with thin cardstock.  This included all of the framing around the cockpit tub, the sides of the seat and head rest, the instrument panel hood, and the canopy rear bulkhead.  I used the cockpit tub to trace and measure the areas needing to be covered and then used 3M 77 spray glue was used to tack down all of the cardstock covers.  The cardstock used is about the thickness of an index card as anything thicker would be difficult to work with and form.  Ultimately, what adding the cardstock does is hide all of the unsightly texture and keep it from reappearing in the future; it essentially makes the cockpit “popcorn proof.”  Then, with the primary cardstock elements in place (except for those to be painted black), the tub was painted Aircraft Grey.  From there, all of the black elements were painted and added separately.

To make the instrument panel, I found an image of a Kfir C7 panel and scaled that to fit the Freewing instrument panel ( download the file ).  It was printed out and cut out to be spray glued on.  Before placing in into the cockpit however, the center section of the panel was cut out and glued to a piece of 1/8″ balsa that was painted black.  This was to give it a little dimension simulate the raised center section of the full size cockpit.

With everything in place, I finalized all of the painting of the interior painting which was primarily finishing out the ejection seat colors.  The seat is a Martin Baker Mk10, so found a picture online and used that for reference as well as took some artistic license as needed.  The head rest was painted Euro I Gray and the seat back painted Olive Drab.  Now, to finish it all out, I did some dry brushing all around like we did with the pilot and then applied a clear coat.  Lastly, a HUD glass detail was installed using some parts I had available from my A-7 cockpit kit.  You can use some triangular cut pieces of sheet styrene to accomplish the sides and then of course a clear piece of styrene for the HUD glass.  The pics below show the fully finished cockpit.

With the cockpit tub completed, the Castle 5 pilot was installed by gluing a balsa wood platform between the sidewalls of the cockpit tub and then gluing the pilot to it.  Lastly, the canopy was glued back on to the airframe with some Formula 560 canopy glue.

Just to reiterate as we close, the whole intent here was to cover some simple things that can be done that make big differences in the looks of a model.  Cockpit scratch building is one of my pleasures, so we will go into much more detail in the future when we get to that point on our competition Skyray build.  For this Kfir, this cockpit is good enough and is a huge improvement to the stock setup.  Next time we’ll cover painting the airplane.  A kfir has to have Isreali camouflage and so we’ll show how best paint the airplane.  See you next time!

The RC Geek Blog is your place to learn about all aspects of the RC hobby. Learn to build, design, drive or fly that RC project you’ve always wanted to build, but have been intimidated to try. This blog is here to help you on your journey and provide tips and tricks as you go! My hope is to inspire builders both experienced and new! So, welcome, please look around, it’s an exciting beginning!  I’m currently documenting my latest competition scale RC jet build, a Mark Frankel F4D Skyray, along with some other fun tips and videos. If you can’t find what you’re looking for on this front page, click on any of the categories to the right and it will show just posts related to those categories. Please feel free to add comments and/or contact me directly if you have questions, I’m here to help! And don’t forget to check out my YouTube Channel, I post new videos every week!

Subscribe To Our Blog Now

By Chris Wolfe 19 Sep, 2023
The B-58 Hustler Saga - From Triumph to Tragedy
By Chris Wolfe 13 Mar, 2023
Preparing for Battle: The ULTIMATE Guide to Scale Documentation Maybe you've heard about RC Scale Aircraft competitions, but the thought it sounded intimidating, or the process of it all seemed daunting and discouraging. Well, fear not! I am here to encourage you and dispel any myths you may have heard if any. Scale competition is a fun and challenging segment of the hobby that will undoubtedly make you a better pilot! So, in light of this, I've started a new "Preparing for Battle" live series and in my first episode, "Preparing for Battle: The ULTIMATE Guide to Scale Documentation," we talk about the AMA Scale Nats with special guest Joe Vermilion from Balsa USA and peel back the layers of scale competition and provide information on what it's all about! As an experienced RC Scale Aircraft competitor and two time US Scale Masters National Champion, my hope is to share whatever knowledge and practical advice I can for newcomers and seasoned competitors alike.
By Chris Wolfe 14 Feb, 2023
Are You Ready to Take Your RC Flying to the Next Level?? Then you’re in luck, because we’re giving away an FMS 1400mm F4U Corsair and an FMS 1100mm PC-21 ! But first, let's address the elephant in the room...it's been quite a while since my last blog post. With the move to TN and everything going on trying to get The RC Geek up and running full time, it's been difficult to sit down and set aside time to write. My goal is to change that going forward, so here's hoping! (check the vid below for even more details about everything mentioned here!)
By Chris Wolfe 25 Jan, 2022
Flight of the Flir Cat…The Sequel!! I tell you what, it has been quite the journey getting here! As a project, this Freewing F-14 Tomcat refinish took much longer than I had originally planned based on all of the other distractions that have come through the shop, but I'm so happy with how this model turned out in the end. It did take a few flights to get tuned and I have made a few small modifications in the process since our last installment, but otherwise I'm happy to report that the Tomcat is flying quite well. The F-14 Tomcat has such a great look and presence in the air, you just can't beat it!
By Chris 10 Jan, 2022
10 channels of power…and 1 receiver to rule them all! I personally love having the option for more channels, especially when building my own scale aircraft. While not always necessary, having channel options available is almost always helpful and it opens up opportunities to add scale functions and/or customize the controls more to your liking. And that's not to mention having individual servo setup across the same functions. So, I was excited to finally see the AR103060T and AR10100T 10 channel receivers released from Spektrum. It opens of channel options in a lighter weight package while also supports all of their new technology. Having been flying the NX10 for some time it is nice to finally be able to utilize all of those 10 radio channels.
By Chris 10 Jan, 2022
Good times and Warbird Flying are back! Needless to say, the last year and a half plus has been hard on all of us. With so many of our normal routines and activities disrupted, it has only brought that many more challenges it seems. This hobby is not just about the airplanes and flying, it is about the friends and comradery that can be enjoyed together with others as well. So, when the Scale Squadron's Warbirds & Classics came up again this year after being cancelled in 2020, I was beyond excited to go; it had been almost 2 years since the last event I went to!
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 4 – Freewing F-14 Tomcat Low-Viz Navy Weathering How low can you go?…a little low-viz Tomcat weathering. Finishing up the refinish work on the Freewing F-14 Tomcat, it’s time to apply some characteristic low-viz Navy weathering. The Flir Cat paint scheme is from the mid 90’s at a time when the Tomcats in service were painted primarily in Dark Ghost Grey (FS36320) with variations thereof. They were high maintenance workhorses at this time and the aircraft got extremely dirty during operation. This opens up lots of opportunities to apply different weathering techniques on the airplane to simulate those years of service on the carrier.
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 3 – Freewing F-14 Tomcat Paint, Markings, & Panel Lines
By Chris 27 Sep, 2021
Refinish A Foam Jet Ep 2 - Freewing F-14 Tomcat Cockpit 3D Printing, Painting and Moving Pilots
By Chris 27 Sep, 2021
Fill…sand…poly…sand…primer…sand…aaaannnnddd repeat… You've probably figured out by now, I have many favorite aircraft. ;) However, if I was to put together my top 5 favorite aircraft of all time, the F-14 Tomcat would probably be at or near the top of that list. The airplane was one of brute force, but packaged in an elegant and distinct looking airframe that truly personified its name, Tomcat. And that's not to mention, it was an extremely capable fighter that filled many roles through the years that operated from the early/mid 70's into the mid 2000s.
More Posts
Share by: