The RC Geek Blog

By: Chris Wolfe

Fly it like you STOL it, micro bush planes FTW!

I had this E-flite UMX Turbo Timber arrive last week and I was really excited to give it a go. It's been a while since I had played with a UMX airframe and I'm always so impressed with how well they fly. In the case of this Turbo Timber, it has some additional features I'd not actually seen in a UMX thus far, most notably the airframe features full navigation lights. Also, being noted as a STOL airplane (similar to the UMX Timber), it features some nice big "Chuck Norris tires" for those unimproved field operations which do the job of impaling the landing area into submission quite well.

The design itself is an evolution of the UMX Timber, but features an updated turbo-prop look as well as a higher power 3400kv motor paired with a 3-blade propeller. The result is a bit better vertical performance if that's something you're looking for. For me, it's a fun STOL aircraft to take on the road for those backyard flying adventures! Plus, with the included flaps and slats, the airplane slows down to a crawl which is quite fun.

WHAT'S IN THE BOX?

The beauty of these UMX airframes is that they come out of the box completely ready to fly. No assembly is required for the Turbo Timber, simply bind it to your radio, setup the programming and CG and you are off to the races! The model itself is a really fun rendition of a turbo-prop powered bush plane having optional slats and a scale looking 3-blade propeller paired with the nice big oversized tires. This provides the ability to handle all sorts of terrain otherwise unmanageable from an airplane this size.


For battery access, the top of the forward cowling is removable which provides a large area for a 2s flight battery. The airplane is very well done and the addition of the lights I will say is a nice touch. Though the airplane is very light it is surprisingly durable.

AIRCRAFT SETUP & CG

The manual recommends setting up the rates at 100% end points for high rates and 70% end points for low rate. I found through flying the airplane that the 100% rates were the best and that no expo was required. This gives you plenty of throw for aerobatics and slow speed control.  The airplane wants to climb with the flaps down, so I added a 35% down elevator mix to account for that.


  • Elevator - 8mm up with No Expo
  • Aileron -18mm up, 4mm down with No Expo
  • Rudder - 10mm with No expo (the airplane does a beautiful knife edge!)
  • Flaps - 8mm half flap with 1mm down elevator mix, 18mm full flap with 4mm down elevator mix


For CG I found the manual recommendation to be great at 28mm as measured from the upper wing leading edge root aft. This corresponds to the aft edge of the plastic wing spar carry through at the wing root. I'm using a 2 cell 280 mah pack which is placed near the rear of the battery plate through the cowl hatch which provides the CG about perfectly. The pre-installed velcro was pretty fine and didn't seem to stick all that well to my industrial strength stuff, so I ended up pulling that out and replacing it to avoid accidentally ejecting a battery.

FLYING THE E-FLITE UMX TURBO TIMBER

This little airplane really is a fun one to fly! The power is fantastic, so STOL operations are fun and easy. The airplane is quite maneuverable, so anything you want to throw it's way, it'll handle easily enough. With the AS3X, the airplane handles all sorts of weather conditions well and really helps the airplane to feel bigger in the air than it is. It's hard to beat this high wing airplane configuration as it is extremely user friendly and easy to fly while still quite maneuverable when desired.

The airplane came with slats, so I had to give them a try of course! Between the two, I didn't find much difference in the performance, flight characteristics, or handling qualities. On an airplane this size, the gap between the slat cove and the wing is quite small, so I wouldn't expect there to be a huge difference in the slow flight performance. I personally do prefer the looks of the slats though. Something about high lift devices like slats that I find so cool looking. :)

FINAL THOUGHTS

I'm always amazed by how well these UMX airplanes fly and this little UMX Turbo Timber is no exception. It has great power and really flies bigger than it looks. The airplane is quite maneuverable and easy to keep in small spaces. Plus, with the power and slow flight characteristics, you can really have some fun STOL operations with it. Until next time, I'll see you at the field!

The RC Geek Blog is your place to learn about all aspects of the RC hobby. Learn to build, design, drive or fly that RC project you’ve always wanted to build, but have been intimidated to try. This blog is here to help you on your journey and provide tips and tricks as you go! My hope is to inspire builders both experienced and new! So, welcome, please look around, it’s an exciting beginning!  I’m currently documenting my latest competition scale RC jet build, a Mark Frankel F4D Skyray, along with some other fun tips and videos. If you can’t find what you’re looking for on this front page, click on any of the categories to the right and it will show just posts related to those categories. Please feel free to add comments and/or contact me directly if you have questions, I’m here to help! And don’t forget to check out my YouTube Channel, I post new videos every week!

Subscribe To Our Blog Now

By Chris Wolfe 19 Sep, 2023
The B-58 Hustler Saga - From Triumph to Tragedy
By Chris Wolfe 13 Mar, 2023
Preparing for Battle: The ULTIMATE Guide to Scale Documentation Maybe you've heard about RC Scale Aircraft competitions, but the thought it sounded intimidating, or the process of it all seemed daunting and discouraging. Well, fear not! I am here to encourage you and dispel any myths you may have heard if any. Scale competition is a fun and challenging segment of the hobby that will undoubtedly make you a better pilot! So, in light of this, I've started a new "Preparing for Battle" live series and in my first episode, "Preparing for Battle: The ULTIMATE Guide to Scale Documentation," we talk about the AMA Scale Nats with special guest Joe Vermilion from Balsa USA and peel back the layers of scale competition and provide information on what it's all about! As an experienced RC Scale Aircraft competitor and two time US Scale Masters National Champion, my hope is to share whatever knowledge and practical advice I can for newcomers and seasoned competitors alike.
By Chris Wolfe 14 Feb, 2023
Are You Ready to Take Your RC Flying to the Next Level?? Then you’re in luck, because we’re giving away an FMS 1400mm F4U Corsair and an FMS 1100mm PC-21 ! But first, let's address the elephant in the room...it's been quite a while since my last blog post. With the move to TN and everything going on trying to get The RC Geek up and running full time, it's been difficult to sit down and set aside time to write. My goal is to change that going forward, so here's hoping! (check the vid below for even more details about everything mentioned here!)
By Chris Wolfe 25 Jan, 2022
Flight of the Flir Cat…The Sequel!! I tell you what, it has been quite the journey getting here! As a project, this Freewing F-14 Tomcat refinish took much longer than I had originally planned based on all of the other distractions that have come through the shop, but I'm so happy with how this model turned out in the end. It did take a few flights to get tuned and I have made a few small modifications in the process since our last installment, but otherwise I'm happy to report that the Tomcat is flying quite well. The F-14 Tomcat has such a great look and presence in the air, you just can't beat it!
By Chris 10 Jan, 2022
10 channels of power…and 1 receiver to rule them all! I personally love having the option for more channels, especially when building my own scale aircraft. While not always necessary, having channel options available is almost always helpful and it opens up opportunities to add scale functions and/or customize the controls more to your liking. And that's not to mention having individual servo setup across the same functions. So, I was excited to finally see the AR103060T and AR10100T 10 channel receivers released from Spektrum. It opens of channel options in a lighter weight package while also supports all of their new technology. Having been flying the NX10 for some time it is nice to finally be able to utilize all of those 10 radio channels.
By Chris 10 Jan, 2022
Good times and Warbird Flying are back! Needless to say, the last year and a half plus has been hard on all of us. With so many of our normal routines and activities disrupted, it has only brought that many more challenges it seems. This hobby is not just about the airplanes and flying, it is about the friends and comradery that can be enjoyed together with others as well. So, when the Scale Squadron's Warbirds & Classics came up again this year after being cancelled in 2020, I was beyond excited to go; it had been almost 2 years since the last event I went to!
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 4 – Freewing F-14 Tomcat Low-Viz Navy Weathering How low can you go?…a little low-viz Tomcat weathering. Finishing up the refinish work on the Freewing F-14 Tomcat, it’s time to apply some characteristic low-viz Navy weathering. The Flir Cat paint scheme is from the mid 90’s at a time when the Tomcats in service were painted primarily in Dark Ghost Grey (FS36320) with variations thereof. They were high maintenance workhorses at this time and the aircraft got extremely dirty during operation. This opens up lots of opportunities to apply different weathering techniques on the airplane to simulate those years of service on the carrier.
By Chris 24 Nov, 2021
Refinish a Foam Jet Ep 3 – Freewing F-14 Tomcat Paint, Markings, & Panel Lines
By Chris 27 Sep, 2021
Refinish A Foam Jet Ep 2 - Freewing F-14 Tomcat Cockpit 3D Printing, Painting and Moving Pilots
By Chris 27 Sep, 2021
Fill…sand…poly…sand…primer…sand…aaaannnnddd repeat… You've probably figured out by now, I have many favorite aircraft. ;) However, if I was to put together my top 5 favorite aircraft of all time, the F-14 Tomcat would probably be at or near the top of that list. The airplane was one of brute force, but packaged in an elegant and distinct looking airframe that truly personified its name, Tomcat. And that's not to mention, it was an extremely capable fighter that filled many roles through the years that operated from the early/mid 70's into the mid 2000s.
More Posts
Share by: