0

MULTIBURNER V2 SIMULATED AFTERBURNER LIGHT SYSTEM

(70MM-90mm EDFS)

The MultiBurner Simulated Afterburner Lighting System: Illuminate the Skies!

Elevate your RC jet experience with the MultiBurner simulated afterburner lighting system - the industry's ultimate choice for simulating the mesmerizing radiance and power of dual-exhaust jet aircraft afterburners. Designed around dual custom-built 28mm diameter LED light boards, the MultiBurner empowers single-fan/dual exhaust installations.  Tailored primarily for 70mm, 80mm and 90mm EDFs, this system delivers an immersive center "glow" and flame effect for each of the two exhausts, that mirror the sheer power of genuine afterburning jet engines. 


Choose Your Power:

Select from our range of CenterBurner options based on your aircraft fan size and motor type:

70mm EDFs (Single EDF/Dual Exhaust)

  • 30mm dia Inrunner Motor MLTB – Engineered to fit most FMS and XFly models 70mm EDF jets (fits over most 30mm diameter or smaller interfaces)


80mm EDFs (Single EDF/Dual Exhaust)

  • 32mm dia Inrunner Motor MLTB – Engineered to fit most E-flite, FMS, and XFly models 80mm EDF jets (fits over most 32mm diameter or smaller interfaces)
  • 36mm dia Inrunner Motor MLTB – Tailored for most Freewing 80mm EDF jets and E-flite 90mm EDF jets (fits over most 36mm diameter or smaller interfaces)
  • Freewing 80mm 12-bl EDF Outrunner MLTB – Tailcone replacement for older Freewing outrunner 90mm EDF (36mm dia interface)


90mm EDFs  (Single EDF/Dual Exhaust)

  • 36mm dia Inrunner Motor MLTB – Designed for most Freewing and E-flite 6s 90mm EDF jets (fits over most 36mm diameter or smaller interfaces)
  • 40mm dia Inrunner Motor MLTB – Engineered for most Freewing 90mm 8s EDF jets (fits over most 40mm diameter or smaller interfaces)
  • Freewing 90mm 9-bl Outrunner MLTB – Tailcone replacement for older Freewing outrunner 90mm EDF  (36mm dia interface)


Seamless Integration with Spektrum Smart Telemetry:

Stay ahead of the game with the V2 CenterBurner controller's compatibility with Smart/SRXL2 telemetry. In the rare event of any controller-related issues via a y-harness on the throttle, simply update your receiver's firmware to the latest version using these cables or set up the burner on a separate channel to ensure smooth operation.


Ignite Your Passion and Illuminate the Skies with the Version 2 CenterBurner!


Unsure About Outrunner and Inrunner Motors??

Outrunner Motor: Characterized by ESC wires exiting the front, and the motor's entire outer section spins around the center windings.

Inrunner Motor: Identified by ESC wires exiting the back and the whole outer section is stationary (internal rotor spins inside the center windings).


Share by: